AquaChek Copper 3-in-1 Test Strips, 25 Strips per Pack | 661454E

AquaChek Copper 3-in-1 Test Strips, 25 Strips per Pack | 661454E

AquaChek
Price
Regular price $14.99
Regular price Sale price $14.99
/

Prevent unsightly surface staining and maintain balanced mineral levels with AquaChek Copper 3-in-1 Test Strips. Copper commonly enters swimming pools and spas through copper-based algaecides, mineral sanitizing cartridges, ionizing systems, and the corrosion of copper heater heat exchangers caused by low pH. When dissolved copper levels rise too high, the metal can precipitate out of solution, leading to green water discoloration, dark stains on plaster or vinyl liners, and green-tinted hair for swimmers.

Designed for quick poolside diagnostics, this diagnostic kit measures total copper alongside essential water balance parameters, pH and total alkalinity. Measuring copper in combination with pH and alkalinity is critical because low pH or aggressive water accelerates copper leaching from equipment and increases staining potential. In under a minute, these strips provide clear, distinct color indications to help pool owners detect rising metal levels and apply metal sequestering agents before staining occurs.

Features

Three-Way Water Balance Profiling: Measures Total Copper (0 to 3.0 ppm), pH (6.8 to 8.4), and Total Alkalinity (0 to 240 ppm) simultaneously on a single test strip.

Stain & Discoloration Prevention: Identifies elevated copper concentrations before metals oxidize out of solution and cause blue-green surface staining or discolored water.

Equipment & Heater Protection: Verifies whether corrosive water conditions are actively leaching copper from gas heater heat exchangers and plumbing components.

Mineral & Ionizer System Tuning: Helps operators of copper-silver ionization units and mineral purifiers monitor and dial in precise residual levels without under- or over-dosing.

Rapid Diagnostic Readout: Delivers clear, visual color matching in under thirty seconds, eliminating cumbersome multi-reagent liquid drop titration.

Specs
Product Type Copper & Water Balance Test Strips
Parameters Measured Total Copper, pH, Total Alkalinity
Total Copper Range 0, 0.2, 0.4, 0.7, 1.0, 2.0, 3.0 ppm (mg/L)
pH Range 6.8 to 8.4
Total Alkalinity Range 0 to 240 ppm
Quantity 25 Strips per Bottle
Testing Method Single-Dip Reagent Strip
Readout Time Approx. 30 Seconds
Application Swimming Pools, Spas, Hot Tubs, Mineral & Ionizer Systems
Manufacturer AquaChek / Hach Company
Part Number 661454E
You may also like
Recently viewed