Hayward Max-Flo Pump Strainer Housing | SPX2700AA

Restore the structural integrity of your pool’s filtration system with the Hayward SPX2700AA Pump Strainer Housing. This genuine OEM replacement part, also known as the pump volute or wet end, is the primary body of the Hayward Max-Flo (SP2700/SP2800) series. It serves as the intake chamber where water enters from the pool, passes through the strainer basket, and is pressurized by the impeller.

Pump housings can suffer from structural damage due to extreme freeze-thaw cycles, over-tightened fittings, or prolonged exposure to high-pressure conditions. Replacing a cracked or leaking housing with this factory-authorized part ensures a perfect fit for your existing internal components and eliminates the air leaks that cause priming failures and reduced water flow.

Features

Precision Molded for Max-Flo Series: This housing is engineered specifically for the SP2700 series pump. It features the exact dimensions and mounting points required to bolt seamlessly onto your existing motor mounting plate and plumbing lines without the need for modifications.

Integrated Strainer Basket Chamber: The internal design includes the precision-molded ledge for the strainer basket and the intake port. This ensures that all incoming water is properly filtered for large debris before reaching the impeller, protecting the internal drivetrain from clogs and damage.

High-Strength Glass-Reinforced Thermoplastic: Manufactured from Hayward’s proprietary reinforced polymer, this housing is built to withstand the high internal pressures of modern pool filtration. The material is designed to resist warping and stress-cracking even in high-heat or extreme weather environments.

Corrosion and Chemical Resistance: Specifically formulated to endure constant contact with chlorinated, brominated, and saltwater. The non-corrosive plastic construction ensures that the interior remains smooth for optimal hydraulics and that the drain plug threads stay clean for easy winterization.

Genuine Hayward OEM Quality: By using the factory-original SPX2700AA, you ensure that the sealing surfaces for the lid and the housing O-ring are perfectly flat. This is critical for maintaining the airtight vacuum required for the pump to prime quickly and operate at its full hydraulic capacity.

Specs